Ccna routing and switching packet tracer labs

#Ccna routing and switching packet tracer labs password#

Assign cisco as the vty password and enable login.Assign cisco as the console password and enable login.Assign class as the privileged EXEC encrypted password.Console into the router and enable privileged EXEC mode.The router interfaces (default gateways) have not been configured yet so Layer 3 traffic is not being routed between subnets. From a command prompt window on PC-A, ping PC-B.

On PC-B, configure the IP address, subnet mask, and default gateway settings.On PC-A, configure the IP address, subnet mask, and default gateway settings.Step 1: Assign static IP information to the PC interfaces. Refer to the Topology and Addressing Table at the beginning of this activity for device names and address information. In this p art, you will set up the network topology and configure basic settings, such as the interface IP addresses, device access, and passwords. Cable the devices, as shown in the Topology and the Addressing Table.Move the required PCs from the Shelf to the Table.Move the required router and switch from the Shelf to the Rack.Test your knowledge by trying to configure the devices without referring to the course content or the previous activities. This activity provides minimal assistance with the commands necessary to configure the router. After the configurations have been saved, you will verify your configurations by testing for network connectivity.ДЄfter the devices have been configured and network connectivity has been verified, you will use IOS commands to retrieve information from the devices to answer questions about your network equipment. You will then configure the devices to match the addressing table. In this Packet Tracer Physical Mode (PTPM) activity, you will cable the equipment as shown in the topology diagram. This is a comprehensive activity to review the IOS commands you have learned. Part 3: Display Device Information Background / Scenario Part 2: Configure Devices and Verify Connectivity Blank Line вЂ“ no additional information Objectives

Ccna routing and switching packet tracer labs